------------------------------------------------
F/W 090911->091001
1.Add Flash support part.
AP A0.9.5->A0.9.8
1.Solve check table and R/W fail.
------------------------------------------------ 
F/W 091001->091102
1.Solve L63B 8 bank R/W issue.
2.Solve Thermal sensor issue.
3.Add Trim command(part).
------------------------------------------------
F/W 091102->091117
1.Solve 256page\4K\4CE\8CE SSD data verify fail issue.
2.Improve 4K Flash performance.
3.Support ECC Error-handling.
4.Slove USB function issue.
------------------------------------------------
F/W 091117->091215
1.SATA ACTL parameter fine-tune.
2.Add ECC fail retry mechanism.
3.Update DRAM DLL parameter(0xB0010202: 0x33==>0x22).
4.fix copyback register settings bug.
5.Reduce random write degradation.
6.SSD initial via 539.
------------------------------------------------
F/W 091215->091221
1.Solve SATA and USB format issue.
2.Solve burn in fail issue.
3.Adj Samsung 8K performance.
4.Fix miss user block.
5.Modification for HDTune.
6.Add NCQ
------------------------------------------------
F/W 091222->100113
1.Change G5D\G6D flash timing register.
2.Correct AHCI compatibility(T61)
3.Change DRAM driving register.
4.Flush timeout issue.
5.Faster build table time.
6.Capacity setting by customer.
7.Trim function option by ini file.
------------------------------------------------
F/W 100113->100226
1. Fine tune SATA PHY paramete.
2. FixATA DMA/PIO error.
3. Fix security erase bug.
4. Fix compatibility issue.
------------------------------------------------
F/W 100226->100309
1. Fix time out issue(flush time out, smart command time out)
2. ATA DMA/PIO error handle.
3. Compatibility issue.
4. Trim command fully support.
5. Modification for Sequential Write Detection.
6. Interleave setting enable.
7. Fine tune random performance.
8. DRAM enter power saving mode during standby & idle mode.
9. Quick rebuild FW table during next reboot.
------------------------------------------------




